Automatic assembly machine for sanitary ware

Introduction:

  • The equipment is mainly used for automatic assembly of sanitary ware products
  • The main functions of the equipment are: automatic feeding of the top cover vibrating disc, lifting of the top cover, automatic feeding of the lower cover vibrating disc, lifting of the lower cover, pressing of the upper cover and the lower cover, and automatic discharging of the product.
  • The equipment can adapt to the assembly and production of three different specifications of sanitary ware, and achieve the goal of flexible production for customers.

Parameters:

• C/T: 3s • UPH: 1200Pcs / H 

 • Utilization rate: ≥85% 

 • Actual capacity: 900-1000 Pcs / H 

 • Defect rat: ≤3% (except for not good incoming materials) 

 • Dimensions: length x width x height 2600x2000x1700mm (specifically based on actual design dimensions)

 • Applicable voltage: AC220V 50Hz 

 • Applicable air pressure: 4~6Kgf/cm2

 • Complete line power: ≤3 KW

 • Air consumption: 500L/H

Characteristics:

  • Fully automatic operation, only manual feeding of vibration disc, simple operation, saving manpower 
  • Make appropriate control programs and use touch screen to control and adjust. 
  • The control program is easy to operate and can be modified according to the production process on site. 
  • Establish monitoring, alarm information and clear prompt to realize automatic shutdown of material shortage and failure
  • Ensuring safe operation coefficient of equipment, emergency stop, automatic power cut, installation of anti-mistake touch isolation facilities
  • Every dangerous area is pasted with protective and warning signs, and acrylic protective panels are added in moving and overturning operation areas.